Mobile lifts and manipulators
BT Lift is a line of custom-made lifting solutions for all industries. The products are tailored for specific applications and ensure reliable and safe material handling.
Satisfied users:
Safety of the operator, equipment and load is our top priority
Due to their reliability and ergonomic design, the BT Lift products are an integral part of production and supply lines in the pharmaceutical, food and chemical industries.
Custom made battery forklift
Flexibility and versatility
Gripping loads with unusual shapes, moving sensitive loads and carrying fragile loads, moving in the clean rooms, lifting in EX zones and highly corrosive environments, maneuvering in tight spaces, installation in awkward and tight spaces …
Advantages of our lifts and manipulators
We have been present on the market for four decades!
During this time, we learned about the problems and needs of our customers with regard to complex handling and lifting operations.
As a solution for these needs, we have developed a special line of mobile equipment BT Lift.
- Perfect ergonomics and user-friendliness.
- Designed for 20 years of service life.
- A modular design allows lifting of various loads.
- Our products reduce the need for repetitive manual operations.
- A lightweight and compact design ensures easy handling and agility.
mobile lifts
- For different loads – foil rolls, tools, barrels, containers, pallets, process tools.
- 10 hours of continuous operation.
- A lightweight and compact design ensures easy handling and agility.
- Flexibility – equipment is tailored to specific needs of the client.
- Quick-change tools/grippers.
- Small total height – only 1,900 mm (for passing through personal doorways).
- Triplex lifting up to a total height of 3,500 mm.
- Different tools/applications can be used.
- Also suitable for clean rooms.
- Made of stainless materials AISI 304 / EN 1.4301.
- Surface treatment for roughness Ra < 1.6 µm.
- Designed for easy cleaning and maintenance.
- Built-in safety system in case of power failure.
- Impact, moisture and dirt resistant control unit.
- The lifting mechanism ensures smooth operation without lubricants or additional maintenance.
- Built-in overload protection.
Lifting capacity: 150-500kg
Max height: 1300-3500mm
Lifting speed (no load): 130mm/s
IP rating: 65
Battery capacity: 24V – 18/45Ah
Battery charger: integrated – 24V 3.5A
Power supply: 230V AC
- ATEX design.
- Coupling system – for precise installation in a specific place.
- For use in extremely corrosive environments – EN 1.4404 – AISI 316L.
- Integrated automated feeder for electrostatic discharge.
- Extra battery – if a constantly charged battery is needed.
- Pre-programmed positions (lift, move levels).
- Quick-change head (the same lift can be used for lifting completely different loads).
- EASY CLEANING and maintenance of parts in contact with the product.
- OPTIONAL FUNCTIONS – lifting, rotating, tilting, mixing, positioning, stacking.
- FOR DIFFERENT LOADS – foil rolls, tools, barrels, containers, pallets, process tools.
- CONTROLLED CHARGING – stepless tilting mechanism adjustment.
- IN-HOUSE DEVELOPMENT – we prepare a study to achieve the efficiency and ergonomic features for the user.
- 3-axis lift.
- Also suitable for clean rooms.
- Made of stainless materials AISI 304 / EN 1.4301.
- Surface treatment for roughness Ra < 1.6µm.
- The electronics is protected against splashing water (IP65).
- The hopper that comes into contact with the product is made of stainless steel AISI 316 L (passivated).
- Clamp for attaching an Okiroto barrel to the lift with a quick release.
- The metering valve on the hopper is opened/closed via an electric motor drive at preset height.
Lifting capacity: 50-100kg
Maximum height: 1000-3500mm
IP rating: 65
Lifting speed (no load): 130mm/s (two-stage)
Battery capacity: 24V – 18/45Ah
Battery charger: integrated – 24V 3.5A
Power supply: 230V AC
- ATEX design.
- Coupling system – for precise installation in a specific place.
- For use in extremely corrosive environments – EN 1.4404 – AISI 316L.
- Electrostatic discharge – for environments where the static buildup is prohibited.
- Extra battery – if a constantly charged battery is needed.
- Pre-programmed positions (lift, move levels).
- Electric motor drive for turning the barrel by 180°.
Charging mobile lifts
Jib and bridge cranes
- ACCURACY – precise gripping and laying down the load.
- SAFETY – design with a rotation limiter and automatic return of the folding arm to the folded state.
- DEDICATED IMPLEMENTATIONS – the end effectors are tailored for the specific use.
- MODULAR SYSTEM for different loads – foil rolls, tools, barrels, containers, pallets, process tools.
- Telescopic arm reach R 2-4m.
- 360° turning angle (freely adjustable start/end position of rotation).
- Easy and user-friendly operation.
Lifting capacity: from 100 kg to 5,000 kg
Lifting and moving speed: 2 speeds
Power supply: 230V AC
- Remote control for handling.
- ATEX design.
- Clean room versions available.
- Different end effectors available according to the customer’s requirements.
- Extremely compact and stable design.
- Reliable 24/7 operation.
- Vibrations are not transmitted to the surroundings during operation.
- Equipment tailored to the specific needs of the client.
- Parts in contact with the product are easy to clean and maintain.
- Controlled linear charging 1,500 mm.
- Mains or battery powered vibratory feeding systems for solid dosage form applications (tablets/granules).
- Designed for clean rooms (pharmaceutical, chemical applications).
- Made of stainless materials AISI 304 / EN 1.4301.
- Surface treatment for roughness Ra < 1.6µm.
- The electronics is protected against splashing water (IP65).
- In-house development – we prepare a study to achieve the efficiency and ergonomic features for the user.
Battery capacity: 24V – 18/45Ah
Battery charger: integrated – 24V 3.5A
Power supply: 230V AC
- ATEX design.
- For use in extremely corrosive environments – EN 1.4404 – AISI 316L.
- Electrostatic discharge – for environments where the static buildup is prohibited.
- Extra battery – if a constantly charged battery is needed.
Vibratory feeder unit
Upgrades for lifts and manipulators
- Instead of buying new equipment, we can upgrade, retrofit and improve your existing equipment according to your needs.
- Turnkey implementation – let us hear about your problem and we will find an optimal solution, taking over all development and engineering.
- CE marking for the upgraded machine with all technical documentation.
- We prepare a full study and develop an upgrade for a specific work operation.
- Safety mechanisms are implemented according to the state-of-the-art.
Why choose a BT lift solution?
5 YEAR WARRANTY!
Because we offer not only standard lifts, but a complete solution.
Because safety, quality, efficiency and ergonomic design are our top priorities.
Because we offer you qualified technical support, service and a complete range of spare parts.
